|
|
|||
6680 XR-5® Fabric
XR® Technology by Seaman Corporation
6680 Permanent Oil Boom Fabric
|
|
|
|
|---|---|---|
| Base Fabric Type |
Woven Polyester
|
|
| Base Fabric Weight (nominal) |
15.0 oz/yd2
|
500 g/m2 min. |
| Finished Coated Weight ASTM D751 |
80.0 ± 3.0 oz/yd2 | 2700 (+100, -100) g/m2 |
| Tongue Tear ASTM D751 @12 in/min |
450/400 lb 8" x 10" sample |
2000/1780 N min 20 cm x 25 cm sample |
| Grab Tensile ASTM D751 |
1300/1200 lb | 5800/5300 N min |
| Strip Tensile ASTM D751, Procedure B |
850/850 lb/in | 1485/1485 N/cm min |
| Adhesion (minimum) ASTM D751, Dielectric Weld |
15.0 lb/in | 65 N/2.5 cm min |
| Hydrostatic Resistance ASTM D751, Procedure A |
700 psi | 475 N/cm2 |
| Low Temperature ASTM D2136 LTC 1/8" Mandrel, 4 hours |
Pass -30° F | Pass @ -34° C |
| Abrasion Resistance H-22 wheel abradant, 1000 g load ASTM D3382 |
10,000 cycles, wt. loss: 15.0 mg/100 cycles
|
|
We believe this information is the best currently available on the subject. We offer it as a suggestion in any appropriate experimentation you may care to undertake. It is subject to revision as additional knowledge and experience are gained. We make no guarantee of results and assume no obligation or liability whatsoever in connection with this information. In case of conflict between standard and metric specifications, standard shall apply.
